Skip to content
How we estimate

Exactly how we calculate your estimate

No black box. Here's the formula, the numbers behind it, where they come from, and what an estimate can't tell you.

The formula
Estimate = base rate × size × quality × condition × regional index

The result is your average scenario. We show a range around it — the low end is 86% of the average and the high end is 120% — because real quotes for the same job vary. The range leans high on purpose: surprises during a project usually add cost, rarely subtract it.

The total is then split into permits (about 2–3%, with a $150 minimum), labor, and materials, using a typical labor share for each project type.

The total you see is rounded to the nearest $50. The breakdown is shown in $10 steps and always adds up exactly to that total.

Timelines start from a typical range for each project (shown in the table below) and scale with your project's size compared with a typical job.

Estimates are informational, not binding contractor quotes. There is no real-time pricing or automatic data feed. Rates change only when we review and update them.

The inputs

Five things change your number

Project size

Square feet, linear feet, tons, or number of windows — whatever the project is priced by.

Material quality

Basic (0.82×), standard (1×), premium (1.35×).

Existing condition

Good (1×), fair (1.07×), poor (1.16×) — more prep and demo cost more.

Your ZIP code

Selects an approximate regional cost index. It is not verified ZIP-level market data.

Base rate

A researched national installed cost per unit for each project type, at standard quality.

Base rates

The national numbers we start from

Installed cost at standard quality and good condition, before your ZIP is applied.

ProjectBase rateTypical sizeTypical totalLabor shareTimeline
Roofing $7.10 / sq ft 1,700 sq ft $12,050 ~60% 2–4 days
Bathroom remodel $205 / sq ft 45 sq ft $9,250 ~50% 10–18 days
Kitchen remodel $185 / sq ft 150 sq ft $27,750 ~38% 21–45 days
Fence installation $32.00 / linear ft 150 linear ft $4,800 ~50% 2–4 days
Driveway replacement $9.50 / sq ft 600 sq ft $5,700 ~55% 2–4 days
HVAC replacement $3,100 / ton 3 tons $9,300 ~45% 1–3 days
Windows & doors $800 / window 10 windows $8,000 ~35% 2–4 days
Siding replacement $9.50 / sq ft 1,500 sq ft $14,250 ~50% 5–10 days
National benchmarks before regional adjustment — not verified local market data.
Regional index

How your ZIP changes the price

We match the first three digits of your ZIP to a metro cost index where we have one. Otherwise we use a broad baseline for the region your ZIP falls in. 1.00× is the national average. These indexes are approximate.

San Francisco, CA 1.52×
New York, NY 1.50×
Boston, MA 1.42×
Denver, CO 1.13×
Miami, FL 1.06×
Dallas, TX 1.00×
Atlanta, GA 1.00×
Orlando, FL (regional fallback) 0.93×
Not included

What an estimate can't see

An estimate is a planning number, not a site inspection. These can push a real quote above our range:

Hidden damage found after work starts (rot, mold, structural repair)
Design, architect, or engineering fees
HOA or historic-district requirements
Unusual access, extreme pitch, or very remote sites
Financing costs and interest
Appliances, fixtures, or materials you buy separately
Sources

Where the numbers come from

Base rates and regional indexes were set by hand from published 2026 cost data, then checked so each project's typical total falls inside commonly reported national ranges. They are researched benchmarks, not verified local prices or contractor bids. We update them manually; nothing updates automatically.

HomeGuide Angi Modernize This Old House Remodeling Cost vs. Value report
How we make money

Free tools, optional requests

Every tool is free, with no signup. You never need to share contact details to see an estimate.

If you ask for help finding a contractor, we follow up personally. BrowserQuote doesn't currently charge contractors or sell requests, and contractor participation never changes the formula or rates on this page.

Start with a free estimate

See what your project should cost in about two minutes. No signup, no sales calls.

Get my estimate